Cedar Rapids Drywall Repair Pros
Drywall Installation & Replacement in Cedar Rapids, IA
Drywall installation and replacement in Cedar Rapids for remodels, additions, and damaged walls. Clean hangs, taped seams, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Cedar Rapids and nearby communities.
Cedar Rapids Drywall Repair Pros handles full-sheet drywall installation and replacement for remodels, additions, and walls too far gone to patch. This is the service for new construction rooms, garage buildouts, or an old plaster-adjacent wall in a Cedar Rapids home that needs to come out and be replaced with new board start to finish.
Bigger jobs like this call for real staging: hanging sheets square, taping every seam consistently, and running mud coats with enough dry time to avoid ridges or shadowing under paint. Whether it's a Marion addition or an older Cedar Rapids room getting gutted, the goal is a wall that looks original, not patched.
What's included
What's Included With Drywall Installation & Replacement
Typically included Optional Customer prep
- Measuring and hanging new drywall sheets on studs or ceiling joists
- Taping and mudding all seams, corners, and screw points
- Corner bead installation on outside corners
- Texture match or new texture application
- Sanding and priming for a paint-ready finish
- Fire-rated 5/8-inch board for garages or shared walls
- Moisture-resistant board for bath-adjacent rooms
- Insulation coordination before hanging (if walls are open)
- Clear the room of furniture and breakables
- Confirm any electrical or plumbing rough-in is finished before hang day
- Let us know about existing paint colors if an exact match matters
Want a clearer scope?
Get a Free EstimateHow it works
How Our Drywall Installation & Replacement Process Works
Step 1Measure and plan
Confirm square footage, board type, and access needs.
Step 2Remove old material
Cut out or tear out damaged/old drywall sections.
Step 3Hang new sheets
Screw board to studs and joists, staggered seams.
Step 4Tape and first mud coat
Bed all seams and screw heads.
Step 5Second and third mud coats
Feather wider each pass, sand between.
Step 6Corner bead and detail work
Finish outside corners and edges.
Step 7Texture application
Match existing finish or apply new texture.
Step 8Final sand, prime, and inspect
Paint-ready walk-through with the homeowner.
Materials
Materials and Methods for Drywall Installation & Replacement
We match board type and finish method to the room, not a one-size approach.
1/2-inch standard drywall
the default for most walls and ceilings, a solid balance of cost and durability for everyday living spaces.
5/8-inch fire-rated board
required in garages and some shared-wall assemblies, adds a layer of fire resistance code inspectors look for.
Moisture-resistant board
used near bathrooms and basement walls where Iowa's humidity swings make standard board a poor long-term choice.
Paper tape with setting-type compound
our standard for new seams, gives a harder, more crack-resistant joint than all-purpose mud alone.
Metal and vinyl corner bead
protects outside corners from impact in high-traffic hallways and stairwells.
Texture-matched spray or hand-applied finish
blended to whatever the rest of the room already has, so the new wall doesn't stand out.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Drywall Installation & Replacement Take?
A full-room installation moves in stages, not a single visit.
- 01
Measure and plan
same day - 02
Demo and hang
1–2 daysdepending on room size
- 03
Tape and mud coats
2–3 daysone coat per day to dry properly
- 04
Texture and paint prep
24 hoursfinal day, cure before painting
Need a schedule that fits?
Get a Free EstimateCost
What does a Drywall Installation & Replacement cost in Cedar Rapids?
Full installs and replacements price out differently than a quick patch, since materials and labor scale with square footage. Every quote depends on square footage and board type, so a free estimate gets you an exact number.
| Project type | Typical range | What’s included |
|---|---|---|
| Single wall replacement | $600–$1,500 | tear-out, hang, tape, texture, paint-ready |
| Full room (4 walls + ceiling) | $2,000–$5,000 | new board, all seams, texture match |
| Garage or basement buildout | $1,500–$4,000 | fire-rated or moisture-resistant board as needed |
| Remodel/addition scale jobs | $5,000+ | multiple rooms, coordination with framing and paint |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Drywall Installation & Replacement
Permit rules vary by project scope, so check with the city or county before larger remodels.
| Typically needs a permit | Often no permit |
|---|---|
| New construction rooms or additions | In-kind replacement of an existing wall's drywall |
| Structural wall removal or reconfiguration | Replacing water-damaged sections in the same footprint |
| Garage drywall installs tied to fire-rating code requirements | Cosmetic re-texture or finish work on existing walls |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Drywall Installation & Replacement
| DIY | Hire a pro |
|---|---|
| Hanging a single small patch panel in a closet or utility space | Hanging and finishing full rooms or additions |
| Basic taping practice on a low-visibility wall | Matching existing texture across large wall or ceiling sections |
| Simple sanding and priming once seams are already finished | Fire-rated or moisture-resistant board installs tied to code |
| — | Any job where uneven seams or poor texture blend would be obvious |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Drywall Installation & Replacement
Call Cedar Rapids Drywall Repair Pros or request a free estimate to get a plan and price for your project.
- Planning a remodel or room addition and need new walls installed
- An old wall has extensive water damage, cracking, or plaster issues beyond patching
- Opening up multiple walls for a renovation project
- A garage or basement needs code-compliant board installed
Seeing warning signs?
Get a Free EstimateBefore & after
Before and After Drywall Installation & Replacement
Before 
After
FAQs
Drywall Installation & Replacement FAQs
Is it cheaper to patch drywall or replace the whole sheet?
Small, isolated damage is almost always cheaper to patch. Once a wall has multiple problem areas, old plaster-adjacent board, or extensive water damage, full-sheet replacement often costs less overall than chasing repeated patches and gives a more consistent finish.
How long does a full room take to install?
Expect several days for a full room: one day to hang, two to three days for mud coats with drying time between each, and a final day for texture and paint prep.
Do I need a permit for drywall installation?
New construction, additions, and structural wall changes usually need a permit. Straightforward in-kind replacement of existing drywall in a room that's already finished usually doesn't. Check with your city or county to confirm.
What board thickness do you use?
1/2-inch standard board covers most walls and ceilings. 5/8-inch fire-rated board is used in garages and some shared-wall situations, and moisture-resistant board goes in bathroom-adjacent and basement areas.
Can you match the texture on the rest of my house?
Yes. We test-match orange peel, knockdown, or smooth finishes before committing to the full wall, so the new section blends with the rest of the room.
Is DIY drywall installation realistic for a whole room?
It's possible but demanding. Hanging board is heavy work, and taping/finishing takes practice to avoid visible seams. Most homeowners get a cleaner result and save time by hiring it out, especially for visible living spaces.
Next step
Get a Drywall Installation & Replacement Estimate in Cedar Rapids
Call (319) 320-1675 or request a free estimate for your installation or replacement project. Cedar Rapids Drywall Repair Pros serves Cedar Rapids, Marion, Hiawatha, North Liberty, Iowa City, and Coralville.
More services
Other Drywall Repair services
Drywall Patching
Drywall patching in Cedar Rapids, IA — clean cuts, texture-matched finish, paint-ready results. Free estimates from a local crew.
Sheetrock Repair
Sheetrock repair in Cedar Rapids, IA covering dents, cracks, and damaged panels. Same material as drywall. Free estimates, clean finish.
Texture Matching
Texture matching in Cedar Rapids, IA for orange peel, knockdown, and popcorn finishes. Invisible patches, free estimates from a specialist crew.
Ask about Drywall Installation & Replacement
Tell us about the project and how to reach you.